The MediaVise SSD Destroyer (MV-SSD) is a commercial-capacity
computer solid-state drive destroyer.
The MV-SSD also destroys and renders inoperable other miniaturized electronic devices and data storage media including USBs, PDAs, cell/smart phones and circuit boards. It will also crush and disable a limited number of HDDs.
The MV-SSD is a powerful, economical desktop SSD destroyer that can be easily deployed in an office or server
Utilizing a proprietary hydraulic power unit developed by Phiston, and a pair of patented crushing plates with arrays of 187 interlocking razor sharp hardened steel teeth, the MV-SSD delivers a whopping 20 tons of destructive forces to the SSD media and their fragile ceramic memory chips that are punctured, crushed, serrated and absolutely decimated on both sides in less than 30 seconds.
How Secure is Data on a Solid-state Storage
Flash RAM-based solid-state storage devices in computers, business servers, mobile phones, tablets, laptops and even cloud data centers, have resident data encryption techniques that enhance their security and made unauthorized data access and recovery very difficult. In addition, SSD-stored data is distributed randomly throughout the flash RAM cells by design, making data recovery even more difficult than from conventional sequential-write hard drives.
Physical destruction of an SSD
further radically complicates, and drastically reduces the already low odds of data recovery by destroying RAM chips, circuit board connections, and SSD-stored encryption keys. The destroyed SSD is unusable, and any chances of recovering data from it are extremely remote, even by forensic means.
How much is too much destruction for your
data destruction needs?
Obviously, the greater the degree to which an SSD is destroyed, the greater the degree of difficulty to recovery any information from it. But correspondingly, the greater the size, the greater the complexity and the greater the cost of the machine to destroy the SSD.
|Machine Weight||172 lbs.
110 volt model
187 lbs. 220 volt model
|Machine Dimensions||27 x 22 x 12 ¼ (H x L x W)|
|Shipping Weight||197 lbs.
110 volt model
212 lbs. 220 volt model
|Power Requirements (voltage / frequency / current)||220 Volts
A.C. ±10%, 50/60 Hz, 7.5 Amps
110 Volts A.C. ±10%, 50/60 Hz, 15 Amps
Factory Configured for any international power supplies
|Maximum Media Size Destroyed||5.75 x 1.25 x 4 (H x L x W)|
|Full Crushing Cycle Time||30 seconds. Debris falls into debris bin. No need to clean machine after each use.|
|Media Accepted||Dedicated SSD destroyer (no adapters required), cell phones, circuit boards, memory chips. Will also crush a limited number of HDDs making them inoperable.|
|Debris Collection||Debris is ejected directly into enclosed collection bin which holds up to 80 SSDs|
|Maintenance/Longevity||100,000 Cycles MTBF. No blades to be replaced or sharpened|
|Technical Support||On-call technical support service department; nationwide and international technical support team that can be deployed if and when repairs or maintenance needed.|