HARD-DRIVE-DESTROYER.COM

Datagauss Degausser
DataGauss-XL

Large Degaussing Chamber for Standard & Extra-large Hard Drives & Backup Tapes

Introduced following customer feedback, the DataGauss XL is a state-of-the-art, pulse degausser complete with an extra-large degaussing chamber to accommodate both standard and full height Hard Disk Drives and Backup tapes. Storage devices up to 6½” x 1?” x 4½” (165mm x 42mm x 114mm) can be securely erased, quickly and effectively, the DataGauss XL is our most versatile degausser.

The DataGauss XL is also available with our unique Data Destruction Auditor which enables you to document and verify your hard drive sanitization/erasure and create data protection audit ready reports.

Easy Operation. Like the DataGauss, the DataGauss XL is easy to operate. Releasing the catch, lifts the lid allowing media to be placed into the chamber. Closing the lid and pressing the 'erase' button on the control panel activates the charging of the powerful degaussing magnetic field. When the display says the degauss cycle is complete, the lid can be opened and the media removed. The entire process takes just 45 seconds.

Throughout the whole erase cycle the on-board processor monitors the erase procedure ensuring that it is completed correctly. The operator is shown erase progress and immediately alerted to any interruptions in the cycle by messages on the LCD control panel.

Compliance.The DataGauss XL is designed to help you comply with the following Government Mandates that require destruction of sensitive information stored on Hard Drives and Backup Tapes before their disposal.
•PCI DSS (Payment Card Industry) Data Security Standard
•PIPEDA (Personal Information Protection and Electronic Documents Act)
•NIST (National Institute of Standards and Technology) Guidelines for Media Sanitization NIST SP 800-88
•NIST (National Institute of Standards and Technology) Guidelines for Media Sanitization NIST SP 800-36
•Gramm-Leach-Bliley Act (GLBA)
•HIPAA (Health Information Portability and Accountability Act)
•California SB-1386
•IRS-1075
•CJIS
•Bank Secrecy Act (BSA)

SPECIFICATIONS
Degauss Method: Pulse discharge, chamber degausser
Media Handling:
Standard and full height PC, Laptop and Server 3.5", 2.5" & 1.8" Hard Drives. Longitudinal & perpendicular recording. All Drive interfaces IDE, SATA and Fibre Channel.

All Backup tapes including DLT,2,3,4,5,6 & SDLT, LTO1,2,3,4,5,6 & 7; 3480/3490/3490e, 3590, 9840 & T9940 & T10000 tape; Ultrium & Redwood SD-3 tape & cartridges; Mammoth 1 & 2, 8mm, AIT1 & 2,M2 tape; DDS 1, 2, 3, 4 & 5, DD-2

Media Chamber Capacity:
6.5" x 1.625" x 4.5" (165mm x 42mm x 114mm)
Magnetic Force:
9,000 gauss
Cycle Time/Erase Time:
45 seconds typical
Throughput: 70 hard drives/cartridges per hour typical
Duty Cycle:
Continuous
Power Supply:
100-120 VAC, 208-240 VAC, 50/60Hz
(Specify voltage and frequency when ordering)
Current Rating:
50Hz 3.5 Amps, 60Hz 6 Amps Typical
Controls:
On/Off Power switch, Erase button
Dimensions (WxHxD):
13.9" x 9.7" x 14.3" (35cm x 24.6cm x 36cm)
Unit Weight:
49lbs (22kgs)
Packed Dimensions (WxHxD): 18.5" x 13.4" x 18.5" (47cm x 34cm x 47cm)
Packed Weight: 53lbs (24kg)
Temperature: 41°F - 104°F (5°C - 40°C)
Humidity: 10%H – 40%H Without Condensation
Options: Data Destruction Auditor
Transportation case
Warranty: 24 months back to base, all parts and labor included. Extended warranties also available.
Certifications: CE

 

Specifications are subject to change without notice

Note: After degaussing, hard drives should not be reused as they are stressed in the erasure process. Some backup tapes may not be reusable after degaussing due to the servo track being erased.

 

Contact us~

Powered by w3.css