HARD-DRIVE-DESTROYER.COM

V880 conveyor degausser
V880 Conveyor Degausser

High volume cassette and cartridge conveyor degausser

A fully automatic conveyor degaussing system for the high volume erasure of cassettes and cartridge tapes, the V880 tape degausser has been designed to bring efficient erasing of high energy tapes, cassettes and cartridges in a compact table top conveyorised solution at an affordable price.

The conveyor transportation system of the V880 degausser ensures that magnetic media is completely erased in an easy and effortless manner.

Easy Operation. The V880 a conveyor degausser is very easy to use. In its standard specification the operator simply presses the “power on” button which turns on the belt and the degaussing field.

The cassettes are placed onto the moving conveyor belt and carried over two degaussing coils which are orientated at 90 degrees to one another, in a ‘V’ formation. The belt speed is fixed at 4 inches per second.

Compliance.The V880 is designed to help you comply with the following Government Mandates that require destruction of sensitive information stored on Backup Tapes before their disposal.
•PCI DSS (Payment Card Industry) Data Security Standard
•PIPEDA (Personal Information Protection and Electronic Documents Act)
•NIST (National Institute of Standards and Technology) Guidelines for Media Sanitization NIST SP 800-88
•NIST (National Institute of Standards and Technology) Guidelines for Media Sanitization NIST SP 800-36
•Gramm-Leach-Bliley Act (GLBA)
•HIPAA (Health Information Portability and Accountability Act)
•California SB-1386
•IRS-1075
•CJIS
•Bank Secrecy Act (BSA)

SPECIFICATIONS
Degauss Method: Conveyor degausser
Media Handling:
Media Cassettes: Beta SP - large & small, Digital Betacam - large & small, D1,D2,D3 - small & medium, MII, Beta, Betacam, U-Matic, U-Matic SP, VHS, SVHS, Compact Cassettes, LTO1, LTO2, LTO3, LTO4 & LTO5, Scotchcart, DAT, 8mm

Cartridges: 3480 & 3490E Cartridges TK50, 70 and 85; Super DLT I, II & III; DLT IV-VSL

Magnetic Force:
5,100 gauss
Cycle Time/Erase Time: 4 seconds typical
Throughput: 600 Beta SP cassettes per hour
Duty Cycle: Non-continuous
Power Supply: 220-250 VAC, 50Hz / 208-220 Vac, 60Hz
(Specify voltage and frequency when ordering)
Current Rating:
10 Amps
Controls:
On/Off Power switch
Dimensions (WxHxD):
15.6" x 7" x 40.2" (39.6cm x 17.7cm x 102.1cm)
Weight:
150lbs (68kg)
Packed Dimensions (WxHxD):
27.6" x 14.6” x 41.3" (70cm x 37cm x 105cm)
Packed Weight:
198lbs (90kg)
Temperature:
41°F - 104°F (5°C - 40°C)
Humidity: 10%H – 80%H non-condensing
Warranty: 12 months back to base, all parts and labor included.Extended warranties also available.
Certifications:
CE


 

Specifications are subject to change without notice

Note: After degaussing, hard drives should not be reused as they are stressed in the erasure process. Some backup tapes may not be reusable after degaussing due to the servo track being erased.

 

Contact us~

Powered by w3.css